How Do I Reset My Tello

DJI Tello Not Turning On (Solved)

If you’re experiencing issues with your DJI Tello, there is a good chance that it isn’t turning on. Here are some tips to troubleshoot the issue:

1. Make sure that your battery is properly charged. If your battery is low, your Tello may not be able to connect to the remote controller or fly properly.

2. Try connecting your Tello to the remote controller using a different USB cable. Sometimes problems can occur when the two devices are connected using a mismatched cable.

3. Make sure that your Wi-Fi connection is strong and stable. If you’re having trouble connecting to the remote controller or Tello, try changing locations or networks.

4. Try resetting your Tello by pressing and holding down both buttons for five seconds until it powers off and then back on again.

How Do I Reset My Tello?

Step 1: Charge your Tello

Step 2: Open the Tello App

Step 3: Tap on the Menu Icon (three lines in a circle)

Step 4: Select Settings

Step 5: Under “General,” tap on “Reset Tello.”

Step 6: Follow the on-screen instructions

How Do I Turn on My DJI Tello?

To turn on your DJI Tello, press and hold the power button for three seconds until the blue light comes on. To power off your Tello, press and hold the power button for five seconds.

If you are having difficulty turning on your DJI Tello, there is a chance that you may need to charge it first. Make sure that the battery is fully charged before trying to turn it on.

If the battery is fully charged and the drone still does not turn on, try connecting it to a power source and checking if the light turns green. If the light does not turn green after connecting it to a power source, then you may need to replace the batteries.

How Do I Know My Tello Drone Is Charging?

1: Check the LED light on the drone is on and blinking

2: Check the battery level on the drone by pressing and holding the power button for three seconds

3: If there is no battery level indicator, connect the drone to an AC outlet and wait until the LED light turns green

How Do I Reset My Tello Battery?

To reset your Tello battery, follow these simple steps:

1. Turn off your Tello.

2. Remove the battery cover.

3. Place the battery in the correct orientation and press down until it clicks into place.

4. Replace the battery cover and turn on your Tello.

How Do I Wake Up My DJI Battery From Hibernation?

If your DJI battery is in hibernation, there are a few things you can do to wake it up.

– The first thing to check is if the battery has been properly charged.

– If it hasn’t been charged for a while, the battery will need to be recharged before it can be used.

– If the battery has been charging for a while and still isn’t working, you may need to reset the battery.

– To do this, turn off your drone and remove both batteries.

– Then hold down the power button for 10 seconds until the drone turns off.

– Finally, reinsert both batteries and turn on your drone.

How Long Does the Tello Battery Last?

Dji Tello drone is a very popular aircraft for aerial photography. It has a range of up to 5 miles and can stay in the air for up to 30 minutes. The battery life is not too bad, with average flight times of around 20 minutes per charge.

Is Tello Drone Waterproof?

DJI Tello is a foldable drone that is designed for ease of transport and quick setup. The drone has a maximum flight time of 27 minutes and can reach speeds of up to 45 mph. The Tello comes with a range of accessories, including a controller, battery, and propellers. 

The DJI Tello is not waterproof and should not be taken into water or other wet environments.

How Long Does the Tello Take to Charge?

Dji Tello is a small drone that is popular for aerial photography and videography. It has a limited battery life, so it’s important to charge the drone often. The Tello takes about two hours to charge from a standard power outlet.

How Do I Know When My Tello Battery Is Fully Charged?

If you’re using a DJI Tello drone, it’s important to know when your battery is fully charged so you can avoid running out of power while flying. There are a few ways to tell if your battery is fully charged, and each one will vary depending on the model of Tello drone you have.

The first way to check your battery’s charge is by using the DJI Go app. The app will show you a percentage indicator for your battery’s remaining life. If the indicator is at 100%, then your battery is fully charged and ready to fly. If the indicator is below 50%, then your battery needs more time to charge before it can be used again.

Another way to check your battery’s charge is by looking for green lights on either side of the drone’s camera. These lights will indicate that the drone’s camera and other systems are operational, which means that the drone’s batteries are also operational. If either light isn’t working or doesn’t turn on when you flip the switch, then your drone’s batteries are not fully charged and should be recharged before use.

How Much Weight Can a Tello Drone Carry?

The DJI Tello drone is a small, lightweight quadcopter that can be used for aerial photography and videography. Like other DJI drones, the Tello is equipped with several sensors and cameras that allow it to fly autonomously or be piloted by the user.

The Tello has a maximum weight capacity of just over 1 pound, which means that it is not suitable for heavy payloads or extended flights.

How Do I Pair My Tello Remote?

The Tello remote is designed to work with the DJI Go app. If you have not already installed the Go app, you can do so by visiting Once you have installed the app, open it and sign in. Next, open the My Accounts tab and click on Add Account.

From here, enter your email address and password and click on Sign In. After signing in, click on your account name in the top left corner of the screen and then select Phone & Tablet Settings from the menu that appears. On the Phone & Tablet Settings page, under Remote Control Setup, find Tello under Supported Devices and click on it to begin pairing your remote with your drone.