How Do I Activate DJI Goggles with DJI Assistant 2

DJI Goggles Not Connecting to Assistant 2 (Answered)

If you’re having trouble connecting your Dji Goggles to your DJI Assistant 2, there are a few things you can try.

– First, make sure that both devices are connected to the same network and have an active internet connection. ]

– If that doesn’t work, try restarting your DJI Assistant 2 and your Dji Goggles.

– If neither of those solutions work, you may need to contact DJI support to get help connecting your devices.

How Do I Connect DJI FPV Goggles to DJI Assistant 2?

When using DJI FPV goggles with DJI Assistant 2, there are a few steps that must be followed in order for the two devices to connect.

– The first step is to ensure that both devices are connected to the same network. DJI Assistant 2 will automatically find and connect to any compatible DJI drones on the same network.

– Once both devices are connected, open the DJI FPV goggles application on your device and select “DJI Assistant 2” from the list of devices.

– If you have not already installed the DJI Assistant 2 app, you will be prompted to do so now. Once installed, open the app and select “Connect” from the main menu.

– On your drone, press and hold down the activation button until you see green lights on both your drone and your goggles indicating that they have been connected.

How Do I Activate DJI Goggles with DJI Assistant 2?

Step 1: Open DJI Assistant 2 and locate the Goggles icon on the main toolbar.

Step 2: Click on the Goggles icon to open the goggles window.

Step 3: On the left side of the Goggles window, you will see a button labeled “Activate.”

Step 4: Click on the Activate button to start activating the goggles.

Step 5: Once the activation process is complete, you will see a message indicating that the goggles are now ready to use.

If you experience any issues connecting your DJI Goggles to DJI Assistant 2, please try the following troubleshooting steps:

– Make sure both devices are connected to the same network.

– Try restarting both devices.

– Check for any updates for the DJI Assistant 2 app on your device.

How Do I Connect My iPhone to DJI Goggles?

1. Open the DJI Goggles app on your iPhone.

2. Tap the “Settings” icon.

3. Tap the “Connect” button.

4. Enter your DJI Goggles login information.

5. Select your iPhone’s Wi-Fi network and enter the password.

6. Tap the “Connect” button to finish connecting your iPhone to your DJI Goggles.

How Do I Start DJI Goggles?

If you are new to DJI goggles, and are having trouble connecting them to your drone assistant 2, there is a few things that you can do.

First, make sure that your DJI goggles are completely charged and ready to go. Throughout this article, we will be using the term “DJI goggles” to refer to the headset/controller combination that you use with your drones. 

– To start DJI goggles, simply open the battery cover on the side of the controller and insert four AA batteries.

– Once you have inserted the batteries, make sure that they are properly seated by pressing down on all four corners of each battery. Then pop the battery cover back into place by pressing down on both sides of it at once. 

– Next, connect your DJI goggles to your drone assistant 2 by plugging in the included cable into one end of the controller and plugging in your drone assistant 2’s power adapter into another end of the controller. Make sure that both devices are turned off before proceeding. 

How Do I Watch DJI Goggles on My Phone?

If you are using DJI goggles and your phone is connected to the same Wi-Fi network, you can watch videos or photos that you have taken with DJI goggles by following these steps: 

1. Open the DJI GO 4 app on your phone. 

2. Tap the three lines in the top left corner of the main screen. 

3. Scroll down and tap Videos & Photos. 

4. Tap on a video or photo that you want to watch. 

5. On the bottom right of the main screen, tap Share. 

6. In the sharing dialog box, select AirDrop and then tap Done. 

7. On your phone’s screen, open AirDrop and select your device from the list of available devices (or type in its IP address). Tap on it to open its share sheet, then tap on Video/Photo (or whatever name you gave it when you saved it). You will now be able to watch the video or photo directly on your phone!

How Do I Update DJI FPV Goggles V2?

If you are using the DJI FPV Goggles V2, there is a firmware update available that will improve their functionality. The firmware update is available through the DJI GO4 app and requires that your drone be connected to the internet. The firmware update is estimated to take around 10 minutes to complete. Here are the steps to update your goggles:

1. Open the DJI GO 4 app on your phone.

2. Tap the three lines in the top left corner of the main screen.

3. Scroll down and tap Firmware Updater.

4. Tap on a firmware package that you want to download and then tap Download.

5. On your phone’s screen, open AirDrop and select your device from the list of available devices (or type in its IP address). Tap on it to open its share sheet, then tap on Goggles (or whatever name you gave it when you saved it).

Once the update is installed, your goggles will reconnect to the DJI Assistant 2 controller and should work better overall.

How Do I Connect DJI Goggles to Smart Controller?

Step 1: Connect the DJI Goggles to your phone

Step 2: Open the DJI Go app

Step 3: Tap on the “Goggles” icon

Step 4: Tap on the “Settings” icon

Step 5: Tap on “Connections”

Step 6: Under “Goggles Settings”, tap on “Smart Control”.

Step 7: Tap on “Enable”

Step 8: Tap on “OK”.